Who Is My Provider?
Apply For New Water
Conservation & Garden
Classes and Events
Secondary Water Use Report
Water Quality Lab
Stream and Reservoir Information
Easements and Right of Way
Executive Staff and
Board of Trustees
New Meter Setup
This page is exclusively for requesting a meter to be installed at an existing service location where water has already been allocated to your property. I.e. You have a purple lid in your park strip or yard area stamped 'WBWCD Irrigation' and need your service activated. If you meet this criteria, please fill out the information below and you will be contacted soon. Thank you!
Please allow 5-10 business days for service activation once this form has been completed and any additional information required is returned to the District.
Enter your information below
Responsible party is different from above (owner is different than occupant)
Responsible Party Information
Secondary Water Service Activation Checklist
This checklist was developed to ensure applicants have verified their connection which will allow the District to efficiently complete activation of service. By ensuring your connection is in an acceptable condition the overall costs to the customer remain low. Please click the check boxes below to verify these items are complete.
The meter is accessible and free from obstructions.
The meter enclosure can be identified as a circular purple lid stamped “WBWCD IRRIGATION”. Generally, this is in the front park strip on the corner of the lot. Applicant should ensure the lid is not covered with dirt or other debris, the enclosure shape has not been compromised (out of round) and there is not damage to the lid or enclosure.
The meter enclosure is free from debris and the piping is sitting off the gravel bottom at least 4 inches.
Please remove the meter enclosure lid and ensure it has not been filled with dirt, water, or other material that would prevent the installation of a meter. Also ensure the distance between the bottom of the piping and the top of gravel is approximately 4-inches.
If you have not been able to answer “Yes” to both items above, please remedy the situation so you are able to complete this checklist in the affirmative to both questions.
Applicant acknowledges that should any of the provided information prove to be incorrect at the time District staff arrive to activate the service, the District may cancel activation and require the applicant remedy the issue to allow for activation. Additional charges may apply.
Please type your name below to verify you understand and agree to all items listed.
There are two types of activations that the District encounters.
1.) A new construction home where a meter has not been previously installed
2.) An existing home that was subject to a move out/move in of a new customer.
Below are links to forms for your review that will need to be completed as part of this process. You will be given a form by the district to complete during this process.
Do not use these forms.
New Construction Document
Existing Property Document
Finalize Installation Request
Submitting Service Activation Request
Your request for a meter installation has been received. You will be contacted shortly to set up a new account, confirm your information and have a work order processed to complete the installation. If you have any questions, you can contact us at 801-771-1677.